Handlebar
GrandBois MAES Italian
Nitto M104-based brake cable-grooved handlebar. The basic style is the traditional Italian Cinelli/Giro-type bend, but the bulging handle is Granboa's basic specification. Of course, it has a polished finish and will shine if you polish it.
Width 410 mm. Reach 96 mm. Drop 150 mm. Clamp diameter 26.0 mm. Weight: 316 g. Made in Japan.More info & orderDajia Cycleworks Far Bar Handlebar
The Dajia Cycleworks Far Bar is a fantastic, lightweight off-road touring bar designed to be used with road components. Unlike dirt drops of years past, these allow you to have a normal hood position in addition to an easy reach to the brake levers from the drops. These bars are compatible with bar-end shifters as well as integrated shifters.
The Far Bars have a 21 degrees of sweep, ~40 degrees of flare, drop of 110 mm, and reach of 76 mm.
These bars are a little different then road bars in terms of measuring the width. The listed width (44 or 48 cm) is measured center of the hoods to center of the hoods.
The overall width is 585mm for the 44cm model, 625mm for the 48cm model. Weight is 292g.
Available in Silver and Noir.
Specs:
Stem Clamp: 31.8mm
Grip: 23.8mm
Drop: 110mm
Reach: 76mm
Flare: 40deg
Sweep: 21deg
Sizes (C-to-C at hoods): 44, 48cmMore info & order Grand Cru Course Handlebar
Velo Orange Drop Bar
A classic handlebar from old stock. The long flat curved shape is big enough to give you a comfortable handlebar position, and you can slide the handlebar position back and forth to achieve stability and comfort even on long distances.
Material: Aluminum
Handlebar Stem Clamp Diameter: 26.0mm
Brake Lever Diameter: 23.8mm
Finish: Polished
Usage: Road
Manufacturer: Velo OrangeMore info & orderNITTO B801AA SSB
NITTO XC handlebar aluminium anodized Heat treated. Width 730mm, Rise 48mm, 15° diameter 31.8-22.2mm, 395g
More info & orderNitto B135AA
The design resembles that of a classic handlebar, except that the flat handlebar ends curve upward slightly, so that curves are turned slightly outward and you can catch turns or drops without twisting your wrist. In the 1940s and 1950s, cycling fashion shifted to Maes-patterned handlebars, but the rando is still a good choice for long rides and bad pavement.
Polished alloy
Collar diameter 25,4mm
Drop 120mm
Range 105mm
Weight 300grMore info & orderSoma Port Mann Handlebar
Swept back town bike handlebar with generous width and leverage. Good option when using a porteur rack, basket or bar bag, since it doesn't sweep too forward.
• 6061-T6 aluminum
• Polished finish, silver or black
• Width: 650mm
• Rise: 25mm
• Center: 31.8mm
• Grip Area Diameter: 22.2mm
• Grip Area Length: 160mm
• Backsweep: 73°
• The internal diameter of the ends are machined to fit some bar end shifters and reverse brake levers.
• Bends forward 22° before bending backwards.
• Weight: 465 grams
A design collaboration with Dream Cycle VancouverMore info & orderSteve Potts Original Dirt Drop Bar 31.8 60cm
The original Dirt Drop Bar was designed many years ago by the three original founders of WTB, Charlie, Steve ,and Mark. This bar was incredibly successful in it's performance and many imitations have been developed over the past years by many different companies.
Steve Potts has come out with a new "Original" version that has has some changes that have improved the performance and placement of the modern controls and different hand positions for the long rides. The bars are made at Nitto, the premiere bar maker in the world!
• Aluminum
• Polished finish in black and silver
• Width at ends: 60cm
• Flare Out: 25°
• Drop Flare: 30°
• Reach: 104mm
• Drop: 133mm
(Reach and drop are measured with the ends tilted down 20°. These figures will vary depending bar how much you angle the ends down.)
• Weight: 365g
• Made in Japan by NittoMore info & orderNITTO B132 AAF
Nitto B132 Randonneur stuur
25,4 mm klemming
Breedte 420 mm hart op hart gemeten
Buitendiameter: 23,8 mm
Drop: 110 mm, bereik: 122 mm
Gewicht: ca. 300 g bij 420 mmMore info & orderNITTO M106NAS
Compact round bend design with single cable groove in front and flat spots on ramps.
– Heat treated aluminum
– Clamp diameter: 26.0mm
– Drop: 128mm
– Reach: 78mm
– Wt.: 280gMore info & orderGranola-Moose Bar
The Granola-Moose is a beautiful one-piece bar and stem combo. It's based on our popular Granola Bar and features an integrated 1 1/8" clamp for threadless steerers. This integrated design makes for a truly buttoned up and streamlined appearance on your city, touring, or mountain bike.
Made from 4130 chromoly steel, this bar has a bunch of details that really makes it special. The steel is heat-treated, the tubing of the bar has multiple butting profiles, the front cross bar is slightly flattened for your lights and/or gizmos, and the system has been tested to stringent MTB standards. All in all, the Granola-Moose makes for a fun, unique, and comfortable upright handlebar.
Width: 660mm
Sweep: 60°
Grip length: 170mm
Rise/drop: 33mm
Steerer clamp diameter: designed for 1 1/8" threadless stems or with 1" adaptor
Grip diameter: 22.2mm
Stem length equivalent: 100mm
Cross bar diameter: 22.2mm
Weight: 926gMore info & orderGrandBois MaesModern
A handlebar with a groove for brake cables based on Nitto M106. It is a trendy anatomical shallow curve, but it is an excellent handlebar with GrandBois' basic specifications.
Width: 410 mm
Reach: 78 mm Drop: 128 mm Clamp diameter: 26.0 mm Weight: 318 g / 410 mm
Made in Japan.More info & orderSteve Potts Siskiyou Bar B832
Cr-Mo Steel Satin nickel chromed finish, Width: 760mm c-c, Backsweep/Grip angle: 30° 22.2mm, Reach of horns: 80mm, Reachback: 72mm, Center 31.8mm-24mm, Weight 750gMore info & order